How To Clean Carpet At Home From Dirt, Stains And Odor, Including Without Removing It From The Floor + Photos And Videos

2024 Author: Bailey Albertson | [email protected]. Last modified: 2023-12-17 12:53

We clean carpet without problems: effective methods and recommendations

When choosing a floor covering, we are guided by considerations of practicality, durability and aesthetic appeal. One of the most important points is its easy cleaning. Carpet raises many questions from housewives about this. How easy and quick to clean it at home?

Content

• 1 Features of carpet with different pile
• 2 Which base coat is best cleaned
• 3 In what ways can you clean carpet in a house or apartment?

• 4 Cleaners that help wash carpets and remove stains

  4.1 How to remove dirt from carpets - video

• 5 Current cleaning: remove dust and unpleasant odors
• 6 General cleaning at home

• 7 Get rid of stains: how to scrub paint, brilliant green and other stubborn dirt

  7.1 How to remove dirt and stains from a light coating - video

Features of carpet with different pile

The carpet requires careful attention to itself: it cannot be knocked out, it cannot be wetted too much, it is problematic to wash and dry. When choosing a coating, pay attention to the pile; not only the appearance or durability, but also the ease of cleaning depends on its characteristics.

The materials from which carpet pile is most often made:

• natural (wool, linen, cotton, coconut fibers, etc.);
• artificial (nylon, polyacrylic, polyester, polypropylene);
• mixed.

Natural materials are environmentally friendly, low thermal conductivity. But they have plenty of shortcomings:

• high price;
• poor wear resistance;
• whimsical care;
• build-up of static electricity.

Short pile carpet is easy to clean

Artificial materials from which the pile for carpets is made have their own characteristics.

1. Nylon is durable and practical to use.
2. Polypropylene is the cheapest material, but the quality matches the cost.
3. Polyester feels like wool, which won the consumer's favor.
4. Acrylic is widely used in domestic areas. The only drawback of such a pile is that it rolls off when cleaning, so you cannot rub it. Acrylic is often combined with other artificial or natural materials.

A pile over 1 cm is considered long. Its appearance and service life depend on the structure (loop, split or mixed). Each type has advantages in operation:

• multi-level looped pile hides sagging;
• no signs of wear are visible on the shorn;
• split with low wear resistance, easy to clean.

The most beautiful and high quality is the multi-level loop-cut pile.

Carpet with loop-cut pile - a win-win option for the living room

Which base coat is best cleaned

Synthetic and natural materials are used as the basis for the canvas.

1. Jute. Natural is susceptible to mold, decay, and fast abrasion. Caring for him is limited to dry cleaning. Synthetic jute is moisture resistant, but its hard surface can damage the carpet on which the carpet is laid.
2. Rubber. Due to its high strength, rubberized carpets are laid in public places with high traffic. Such a base is not afraid of water, but in order to dry it, you need to completely remove the coating.
3. Felt. For carpet, an artificial version is often used. It has excellent thermal insulation characteristics, it is easy to install and maintain, and is not afraid of moisture.
4. Textile. Due to the complexity of manufacturing, the base is the most expensive. But the material has excellent characteristics that justify the cost. Textile carpets can be cleaned with a vacuum cleaner, foam or dry powders.
5. Foamed latex. Good in operation due to heat retention and sound insulation. It is durable, fireproof, but has a lifespan of only 6 years. Then the base loses its elasticity and begins to crumble. In terms of properties, the material is similar to rubber: moisture resistant, but dries for a long time.

The quality of the base is just as important as the quality of the pile

Which base is better? It depends on the purpose of the room and the surface on which the carpet is laid.

1. Felt is suitable if there is an expensive floor covering under it.
2. In hallways, on summer grounds, in places with high traffic, it is appropriate to lay rubber-based carpet. It is moisture resistant and wear resistant.
3. For children's rooms, it is better to use a synthetic base. It is non-allergenic and easy to clean.

In what ways can you clean carpet in a house or apartment

The cleaning method is chosen depending on the material from which the coating is made. The pile of the carpet is treated with special compounds that prevent rapid contamination. Too frequent treatment washes away this layer. Accordingly, the more often you clean, the faster the carpet gets dirty. You can remove stains on it in different ways:

• dry or wet cleaning;
• cleaning with a vacuum cleaner;
• foam cleaning;
• removal of contamination using professional products.

After wet cleaning (with foam or a washing vacuum cleaner, for example, Karcher), natural materials cannot be quickly dried. Therefore, it is better to use special dry formulations. You can wipe the carpet with a well wrung out cloth, but not more than once a month.

Wet cleaning is not suitable for natural pile carpets

Synthetic materials make cleaning easier. You can use a washing vacuum cleaner, provided that the moisture is removed as much as possible.

The need to remove the floor covering depends on the chosen method. Dry cleaning is an easy and safe process for the product: apply, wait, vacuum. After wet cleaning, the carpet and the backing must be dried.

Cleaners that help wash carpets and remove stains

There are several types of carpet cleaners: shampoos, aerosols, and dry powders. The principle of their action is the same: collecting dirt particles at the base and along the length of the pile, foam or powder lifts it up, from where it can be easily removed with a vacuum cleaner.

1. For coatings that cannot be heavily dampened, dry powders are ideal to wipe off dirt. Try baking soda. Spread it evenly over the surface overnight, and vacuum in the morning.
2. Any coating can be washed once a month with shampoo or foam.
3. The good thing about aerosol is that it doesn't need to be diluted with water. In the process of application, it is possible to get rid of stains, the carpet absorbs less moisture and does not require drying.

How to remove dirt from carpets - video

Current cleaning: remove dust and unpleasant odors

Routine cleaning should be done weekly.

1. Carpet on a natural basis and with natural pile is enough to vacuum.
2. If you want to freshen the coating, use baking soda, it absorbs dust and unpleasant odors.
3. For natural pile carpets, do not use a vacuum cleaner frequently. Such a coating dries for a long time, and a humid environment promotes the growth of bacteria and unpleasant odors.

General cleaning at home

Depending on the pile and substrate material, dry, wet or carpet cleaning can be used. Dry cleaning is carried out using a special powder.

1. Spread the chemical over the carpet and leave overnight.
2. Vacuum up the powder in the morning.

Wet cleaning involves cleaning with foam, aerosol or a washing vacuum cleaner.

1. Apply foam to the coating (you can use the aerosol immediately, and dilute the shampoo with water).
2. Wait for the foam to dry.
3. Vacuum.

It is possible to wash the carpet from dirt only in cases where the pile and base are made of synthetic materials. After washing, remove the cover to dry.

1. Dilute the powder with warm water according to the instructions.
2. Wet the carpet well with the compound, clean with a brush.
3. Drive the dirty water to a separate place with a spatula and wipe up with rags.
4. Remove the floor covering and hang to dry.

Getting rid of stains: how to scrub paint, brilliant green and other stubborn dirt

Fresh stains are much easier to remove than stubborn ones. Rub them, moving from edge to center, so as not to smudge. In addition to industrial stain removers, housewives use folk remedies: soda, vinegar, ammonia, citric acid or alcohol. They are safe for health, and sometimes act more effectively than purchased ones.

1. To remove chocolate, juice or tea stains, mix 1: 3 vinegar and alcohol, apply and brush.
2. Remove stains from blood, eggs with soapy water and soda, then rinse with vinegar and wipe with a damp cloth.
3. Chemical contamination (varnish, paint, ink) can be removed with a solvent and alcohol.
4. Stamp ink stain is removed with gasoline.
5. Fruit traces are removed with citric acid (1/3 teaspoon per 1 glass of water).
6. If green stuff is spilled on the carpet, moisten the stain with hydrogen peroxide. When it dries, there will be no trace of dirt.
7. Freeze the sticky gum with a piece of ice: place it on the sticky lump and hold until the gum becomes brittle. Remove residues by hand or with a vacuum cleaner.
8. Sauerkraut can easily remove a fresh chocolate stain.

There is a universal remedy for removing stains from carpet or carpet. To prepare it you will need:

• water - 1 l;
• soda - 1 tbsp. l;
• washing powder - 1 tbsp. l;
• vinegar - 4 tbsp. l.

Make a solution and gently wipe off the dirt. You will notice the result immediately.

How to remove dirt and stains from a light coating - video

There are dirt that can be removed in only one way - to replace the carpet. Antifreeze stains are one of those. Neither folk remedies nor industrial drugs help here.

Carpet maintenance is a bit more troublesome than other surfaces. But with regular vacuuming and timely removal of stains, the coating will retain its excellent appearance for a long time.