Table of contents:

How To Bleach The Soles Of Sneakers, Clean Them On Sneakers Or Other Shoes, Wash Them To White Using Various Methods + Photos And Videos
How To Bleach The Soles Of Sneakers, Clean Them On Sneakers Or Other Shoes, Wash Them To White Using Various Methods + Photos And Videos

Video: How To Bleach The Soles Of Sneakers, Clean Them On Sneakers Or Other Shoes, Wash Them To White Using Various Methods + Photos And Videos

Video: Cleaning ANY white sneaker 101| Fila Disruptor II 2022, December

We clean the white shoe soles quickly

Adidas sneakers
Adidas sneakers

Shoes with white soles always look stylish. However, after 2–3 appearances, the sole noticeably loses its whiteness, especially if you wore shoes in autumn (rain and mud) and in summer (dry dust). The gray tint gives the shoe a messy look. Is it possible to return the original color to the white sole of sneakers, sneakers and other types of shoes and how to preserve it?


  • 1 We clean shoes with white soles at home

    • 1.1 What is the white sole made of
    • 1.2 Means and methods of cleaning from yellowness

      • 1.2.1 Preparing shoes with white soles for cleaning
      • 1.2.2 We erase the plaque. Eraser and melamine sponge
      • 1.2.3 We clean sneakers with washing powder
      • 1.2.4 How to clean yellowed soles with bleach
      • 1.2.5 Anti-yellow plaque toothpaste / tooth powder
      • 1.2.6 Soda for whiteness
      • 1.2.7 How to clean with acetone or nail polish remover
      • 1.2.8 We remove dirt with citric acid
    • 1.3 We remove various stains from the surface of the shoes - traces of a marker, paint, shoe glue
  • 2 White for a long time - how to keep the color of the rubber outsole

    • 2.1 How to wash the white rubber soles of sneakers and sneakers: video
    • 2.2 We clean the soles of shoes with our own hands: video

We clean shoes with white soles at home

What is the white sole made of

The condition of shoes with a white sole initially largely depends on the composition of the material of the sole itself. Modern soles are made of poly- and thermopolyurethane, polyvinyl chloride, tunit, felt, ethylene vinyl acetate, elatomer, leather, wood. Traditionally, a white sole is an integral part of sneakers and sneakers. It is made from rubber with various additives that add wear resistance, reduce pressure on the foot, and improve thermoregulation. For example, elastopore rubber is porous, durable and at the same time lightweight. Carbon rubber has great resistance and elasticity. It is these 2 types of rubber that are most often used to create sneaker soles and sports shoes.

In addition to useful properties, thanks to additives, the rubber acquires a pattern, a different texture.

The composition of the material also depends on how much easier it will be to clean. The more porous the material, the deeper the dirt will penetrate and the more difficult it will be to remove them completely. The relief also plays an important role. A more embossed sole, with "channels", "holes" will collect more dust than a smooth one.

You can return the snow-white sole to its original look if you have not worn sneakers for months without interruption and cleaning. As with any cleaning, regularity is the key to success.

The cleaning of white soles is almost the same for any shoe. However, it is possible that the sole of your sneakers is made of rubber with some specific additives that cannot tolerate certain media. If you still have a box or cleaning recommendations, do not neglect them. In all other cases, first test the cleaner on the underside of the sole or on the inside of the shoe. If after one or two hours no cracks, spots, discoloration appear, the product can be used.

The easiest and most expensive way is to dry-clean your white-soled shoes. There she is guaranteed to be put in order. However, it will not be cheap, and the result will not last long - literally until the next walk. Therefore, it makes sense to use home remedies to give the white soles of shoes their original whiteness.

Means and methods of cleaning from yellowness

Shoes with white soles and upper in contrasting colors - black, dark blue - look most impressive. How to bleach the edging and outsole without staining the upper?


When bleaching the soles, cover the dark top of the shoe

Use regular masking tape - just glue it carefully along the edge of the shoe. Of course, this must be done after cleaning the dust from the shoes, otherwise the tape will not stick. Two or three coats will be enough to keep drops or particles of the product used to whiten the sole off the dark upper.

Preparing shoes with white soles for cleaning

Before using any product, shoes need to be prepared - cleaned of dust. This can be done by hand - with a brush or vacuum cleaner, or you can wash your shoes in the washing machine. This must be done carefully, following certain rules.

  1. Shoes must be disassembled into parts - remove the insoles, unlace, remove all removable parts. It is better to wash them separately by hand.
  2. Place the shoes in a special washing bag and place them in the drum of the washing machine.
  3. Switch on the "sportswear / shoes" mode. In the absence of this, a "delicate wash" will do. The temperature for such shoes is not higher than 40 degrees. Shoes should be washed with a special detergent for washing sportswear or a very mild detergent gel.
  4. If necessary, switch on the Rinse program additionally. The spinning and drying modes cannot be used for sneakers and trainers!
  5. Dry your shoes naturally. You can also use special shoe dryers.
  6. Never put wet or damp sneakers on the battery. Firstly, sneakers or trainers can deform from such forced heat. Secondly, from overheating, the white sole can turn yellow forever.
Machine wash
Machine wash

Sports shoes can be washed in a washing machine on a delicate cycle with special products

So, you have cleaned out the dust and dirt and the white soles. Now arm yourself with the means at hand.

We erase the plaque. Eraser and melamine sponge

A regular school eraser can help you clean white soles. All you need is will and patience. And an eraser, of course. By the way, you need a light eraser, preferably white. The method is quite long and requires painstaking work.

Melamine sponge is a product with truly magical properties.

  1. Wet a sponge.
  2. Just wash off the dirt.
  3. Rinse the sponge in water as it gets dirty.
Melamine sponge
Melamine sponge

No detergents required to remove dirt with a melamine sponge

We clean sneakers with washing powder

They can not only wash things, but also bleach the white soles.

  1. Dissolve the powder in warm water. The concentration of the powder should be 2 times higher than for washing.
  2. Submerge your shoes in the solution. It should only cover the sole!
  3. Leave it on for half an hour. Use a stiff-bristled brush to brush over the sole.
  4. Rinse off remaining powder and foam thoroughly.

This method is good for shoes that you have no doubt about. The sole is attached to the sneakers mainly with glue, and in inexpensive models, after soaking, it can simply "move away".

How to clean yellowed soles with bleach

Before using the bleach method, a test should be carried out - drop the bleach onto the sole surface and leave. If everything is visually fine with the sole, you can use bleach.

  1. Put on rubber gloves.
  2. Dissolve bleach in water. Concentration 1: 2.
  3. Place the shoes in the solution so that only the soles are covered. Check every 30 minutes as soon as the sole is bleached to the desired state - rinse off the detergent and dry.

The method is unsafe, as it makes the rubber looser with prolonged contact.

Anti-yellow plaque toothpaste / tooth powder

The abrasiveness of the toothpaste cleans well the white soles of sneakers or sneakers.

  1. Apply a small amount of toothpaste or powder to an old toothbrush and brush the sole well. Pay special attention to irregularities (depressions, pimples) of the sole - this is where most of the dirt accumulates.
  2. Rinse off the foam with water. If necessary, use a brush with a stiffer bristle.
Toothpaste and powder
Toothpaste and powder

Toothpaste or tooth powder is well washed off dirt from white shoe soles

Soda for whiteness

Again, we rely on abrasive.

  1. Put some baking soda on a damp, soft cloth.
  2. Rub the edging and outsole well. It is better to do this over the sink or by spreading a rag - the soda will crumble when cleaning. Use an old toothbrush to clean the indentations in the sole.
  3. Rinse off any remaining baking soda with water and dry your shoes.

To bleach yellowed shoe soles, mix baking soda and lemon juice and scrub the surface.

How to clean with acetone or nail polish remover

  1. Dampen a cotton ball or soft cloth with liquid and rub the sole. Cleaning must be done carefully so that liquid does not get onto the fabric upper of the shoe.
  2. Rinse with water and pat dry with a paper towel or tissue.

A rag for this method must be taken necessarily white, colored from acetone can shed and ruin the shoes.

The method perfectly removes dirt such as black stripes on shoes or yellow spots, but it is more suitable for a flat surface than for embossed ones.

To whiten the sole, you can also use acids - citric and acetic.

We remove dirt with citric acid

  1. Moisten the surface of the sole.
  2. Sprinkle some citric acid powder and scrub with a rag or sponge.
  3. Leave it on for 5-10 minutes.
  4. Shake off any remaining acid and rinse the surface with water.

Citric acid will also help whiten the soles that have turned yellow from time to time (provided that the yellowness does not appear from drying on the battery).

Bleach with vinegar

  1. Prepare a solution - dilute table vinegar in warm water in a 1: 3 ratio.
  2. Moisten a cloth with the solution and wipe off the dirt. Rub the stubborn stains with a brush.
  3. Rinse the surface.

Home remedies to remove plaque and stains from white soles: photo


The acid in vinegar will help you cleanse and whiten the white soles of sneakers and sneakers

Lemon acid
Lemon acid

Citric acid will cleanse and whiten the sole of your shoes

Nail polish remover
Nail polish remover

Nail polish remover will quickly remove black streaks on shoes


Due to its abrasive and bleaching properties, baking soda well cleans dirt on shoes

We remove various stains from the surface of the shoes - traces of a marker, paint, shoe glue

Sometimes shoes need to be cleaned not only of street dirt, but also of various stains. In such cases, you need to solve 2 problems at once - get rid of the stain and not ruin the shoes.

Marker marks on shoes are removed with alcohol, toothpaste with soda, WD-40.

Alcohol. It is better to remove traces of marker from shoes with alcohol (96%), although any alcohol with an alcohol content higher than 50% will do


Alcohol will quickly remove marker stains on shoes

  1. Soak a cotton pad and wipe the marker stain.
  2. Repeat as necessary. Try not to wet the stain too much.

WD-40. "Vedashka" can do a lot, including displaying a trace from a marker


The magic "Vedashka" solves many everyday problems. Marker marks on shoes are no exception.

  1. Apply the product to the stain and wipe with a clean, dry cloth.
  2. The product should be used with caution.

Toothpaste + soda. Mix toothpaste and baking soda in a 1: 1 ratio. First saturate the stain with the compound, and then rub the mixture into the stain with a damp cloth. The method takes time and effort

Glue marks on shoes are not easy to remove. It is necessary to use agents that soak and release glue particles. To do this, use alcohol, vinegar, soda and special tools.

The easiest way to remove the glue is to warm it up. To do this, use a hairdryer. Heat the stain until the glue softens. Then gently scrape off the layer. Repeat until the maximum amount of adhesive has been removed. It is possible that already at this stage the glue has completely removed from your shoes

Hair dryer
Hair dryer

Heat with a hair dryer before removing the glue stain

If you still have glue, use other means.

Alcohol. It dissolves adhesive bonds, making them tack free

  1. Saturate the glue stain with rubbing alcohol.
  2. Rub gently. If the glue starts to soften, remove it. If not, wait and reapply the rubbing alcohol to the stain.
  3. Scrape off any remaining glue and dry your shoes.

A paste of baking soda and water will help remove the glue stain

  1. Mix 1 teaspoon of water and 1 tablespoon of baking soda.
  2. Apply the mixture to the stain and let it sit for 5-10 minutes.
  3. Use a rag to rub the stain in a circular motion until the glue is completely removed.
  4. Rinse off the paste with warm water.

This method is suitable for any surface where glue drops have gotten.

The acid in table vinegar also softens the glue particles

  1. Saturate the glue stain with vinegar and let it sit for 15-20 minutes.
  2. If the glue has softened, try rolling the glue with a dry cloth or scraping it off.

Special means for removing glue are called “Antiklei”. These can be purchased at hardware stores. It is enough to simply apply such a product to the stain and the glue will begin to dissolve


"Anticlee" or "reverse glue" makes surfaces peel off from each other

The solvent will remove paint marks on the shoes. Before using these products, try them on the sole or inside the shoe

  1. Dampen a cotton pad with acetone and wipe the stain.
  2. Once the stain is gone, blot the area with a paper towel and pat dry.

The acetone method is suitable for oil paint. If you are not sure what kind of paint your shoes are stained with, then use the following recipe. It is suitable for all types of paint removal.

  1. Mix ammonia and water in a 1: 3 ratio.
  2. Dampen a soft cloth and wipe the stain. Repeat until the stain is gone.

This method is suitable even for thin suede shoes.

Long lasting white - how to keep the color of your rubber outsole

The challenge that arises after all the efforts to clean white shoe soles is how to maintain the result. Shoe cosmetics will help you with this.

Purchase a colorless shoe polish. After cleaning and bleaching, apply a little cream and buff with a soft cloth. This will preserve the whiteness of the edging. Of course, it is easier to prevent stains, gray and yellow deposits. Take care of your shoes before you put them on for the first time - treat shoes with a special water-repellent impregnation. It is most often in a spray format that can be conveniently applied to the upper and outsole of any material.


Water-repellent impregnation protects against moisture and dust

Remember to renew your protection - spray every two weeks or every time before putting on your shoes.

How to wash the white rubber soles of sneakers and sneakers: video

We clean the soles of shoes with our own hands: video

Shoes with white soles must be looked after regularly. Use shoe care products - cream, protective spray to prevent dirt from entering. To clean the white soles from dirt, you can use the tools at hand. Clean your shoes from dust and stains regularly.

Popular by topic