How To Get Rid Of An Unpleasant Smell In A Washing Machine: We Remove Odors Of Mold, Gasoline And The Like + Photos And Videos

2024 Author: Bailey Albertson | [email protected]. Last modified: 2023-12-17 12:53

How to remove unpleasant odors in a washing machine yourself

The advent of washing machines greatly facilitated housekeeping. Today it is enough to load the laundry, choose the right mode, wait a little and enjoy the scent of clean laundry. But what to do if an unpleasant smell appears in the car? You can get rid of this problem yourself, without resorting to the expensive services of a master.

Content

• 1 How to remove an unpleasant smell of gasoline or thinner with vinegar

  1.1 Methods for eliminating the smell of gasoline - table

• 2 We clean the automatic machine from mold with citric acid

  2.1 How to clean the washing machine from scale and mold - video

• 3 What means can you eliminate the rotten smell of the swamp

• 4 The smell of burning: where does it come from and how to get rid of it

  4.1 How to effectively clean the heating element in a washing machine - video

• 5 Prevention of unpleasant odors in the washing machine

How to remove an unpleasant scent from gasoline or thinner with vinegar

The smell of gasoline may remain in the car after washing workwear or items that have recently been stained. In this case, available tools and the correct washing regime will help.

Ways to eliminate the smell of gasoline - table

Gasoline odor removers	How to apply
Vinegar	Pour 200 ml of vinegar into a container for detergents. Set the wash cycle to the maximum temperature. Dry the machine thoroughly at the end of the cycle.
Vinegar and soda	Pour 100 g of baking soda into a container for powder. Set the washing temperature to 30 degrees. Start the "no laundry" mode. After the end of the first wash, pour 200 ml of 9% table vinegar into the powder container. Switch on the “no laundry” mode again. Dry the machine after washing.

Using baking soda and vinegar, you can remove the smell of gasoline in the washing machine

More than one such treatment may be needed. To check the next day, run the wash with some unnecessary rag, towel. If the smell of gasoline is felt from the laundry or the machine, it is necessary to carry out another cleaning cycle.

We clean the automatic machine from mold with citric acid

Mildew odor in the washing machine is caused by insufficient drying. If you wash your machine frequently and do not dry well or close the door tightly, mold will not keep you waiting.

You can eliminate the unpleasant odor by cleaning.

1. Take the container out of the machine and rinse it well with hot water, removing any remaining detergent.
2. Remove water from the folds of the seal by wiping them with a tissue. This should be done after each wash.
3. Clean the seal inside with baking soda. Use an old toothbrush for hard-to-reach areas.
4. Pour 80-100 g of citric acid into the container and run the wash cycle at the maximum temperature.
5. After the end of the cycle, remove and dry the container, wipe the seal, and let the machine dry completely.

2 bags of citric acid and a wash cycle at maximum temperature will save your machine from many problems

Do not close the machine door tightly after each wash. Cover it to provide adequate airflow for drying and prevent mold from reoccurring.

How to clean a washing machine from scale and mold - video

What means can you eliminate the rotten smell of the swamp

If you think that a frog is about to jump out of the washing machine, then it's time to take action. A rotten smell appears due to stagnant water inside the parts. You can get rid of it by finding out the reason. The machine is constantly in contact with water during operation. It can remain in different places: the filter of the drain valve, the hose, the door seal, the drum. Stagnating, the water acquires a characteristic swamp smell.

A rotten smell arises from stale water trapped inside the washing machine

The first thing to do if a rotten smell appears in the machine is to clean the filter. You can do this yourself. It is necessary to remove small objects from the filter that are stuck inside during washing. After lying in water for some time, they begin to exude unpleasant aromas.

How to clean the filter yourself: procedure.

1. Carefully remove the panel covering the filter.
2. Tilt the clipper back slightly so that the weight is on the rear feet.
3. Place a small container: container, clean scoop.
4. Grasp the filter and gently unscrew it counterclockwise.
5. Examine the detail. If the filter is slippery, coated or stuck in it, rinse it thoroughly with a brush. Even if no problems are visually visible, rinse it under the tap.
6. Look in the hole for the filter, something may get stuck there. Remove debris and clean the hole. It is convenient to do this with a long-handled brush or a small brush.
7. Reinsert the filter and run a short wash cycle to check.

The drain pump filter should be checked regularly and cleaned if necessary

For prevention, it is recommended to clean the filter at least once every six months.

After cleaning the filter, check the drain hose. During operation, particles of pile, dust particles, and detergent residues stick to its inner surface. Mixing with water, they form a silty coating. To clean, run the wash cycle at the maximum temperature.

Burning smell: where does it come from and how to get rid of it

If you have a new washing machine, plastic parts can smell like burning when heated. Don't worry about the first wash. However, if the burning smell appears regularly, then contact the service for the warranty card. You may have come across a defective product.

A burning smell, as well as a rotten or rotten smell, can be emitted by heating elements. The creepy white heating elements from television commercials are pure fantasy. It is not lime that settles on the surface of the heating device, but plaque from pile from clothes, fine litter and excess detergents. When the machine is running, this mixture begins to give off a burning smell. How to deal with it?

By regularly cleaning the heating element, you will prevent many problems and save on car repairs

Clean the clipper regularly by adding citric acid instead of powder. Set the maximum water temperature - 90–95 degrees. Boiling water in combination with acid relieves heating elements from sticky deposits, and your home - from the smell of burning.

Ordinary vinegar will do the trick.

1. Run the empty wash at the boil program or at the maximum temperature setting.
2. Wait for the first water to drain.
3. Pour a glass of 9% vinegar into the detergent compartment.
4. At the end of the wash, start an extra rinse cycle.
5. Unplug the appliance and check the drain filter for pieces of scale or dirt.

How to effectively clean the heating element in a washing machine - video

Prevention of the appearance of unpleasant odors in the washing machine

For the machine to work for a long time and without interruption, follow the basic rules of operation. For safety reasons, it is forbidden to use gasoline, acetone and other solvents in such devices.

Different types of machines have different operating rules, but the general safety precautions are the same

To prevent a musty smell from forming inside the machine, prevent small objects from entering the filter.

1. Before each wash, check your pockets by removing all small items.
2. Use special laundry bags and covers (for example, for underwear).
3. If the garment has fasteners or other small accessories, fasten the garment and turn it inside out, this will prevent parts from breaking off.

Do not store dirty laundry in the washing machine.

1. The items in the machine soak up residual water, creating a moist environment for bacteria and molds to thrive.
2. When storing items between washings, the machine is unbalanced and soon a serious breakdown may occur - a problem with the rotation of the drum. It is easier to get a basket for dirty laundry, it is clearly cheaper than a new washing machine.

The machine must dry completely between washes. This simple technique ensures the safety of parts and a long service life of the product.

The average service life of washing machines is 10 years. In order for your faithful assistant to work flawlessly all this time, she needs regular maintenance: descaling, cleaning the filter and thorough drying. Contact a washing machine repair technician in time - high-quality diagnostics can prevent many problems.