How To Properly Store Mink And Other Fur Coats In The Summer: Preparation, Conditions, Nuances + Video And Reviews

2024 Author: Bailey Albertson | [email protected]. Last modified: 2023-12-17 12:53

How to store a fur coat in the summer: when simple tips are expensive

A fur coat is not only an attribute of a winter wardrobe, but also an indicator of the status of its owner. However, natural fur does not tolerate neglect and is highly susceptible to adverse influences. To maximize the period of its operation, you should understand how to store mink and other fur coats in the summer.

Content

• 1 Special conditions - a whim for an artificial, but a harsh necessity for a mink coat
• 2 How to prepare natural fur for storage
• 3 Wardrobe, balcony or freezer - which room can be used for summer storage
• 4 Case or vacuum bag?

• 5 Subtleties of home storage of different furs

  • 5.1 Mouton
  • 5.2 Mink
  • 5.3 How to store products from nutria, goat and other types of fur

• 6 What can result from non-compliance with the rules

  • 6.1 Damage by moths
  • 6.2 Creases on folded product
  • 6.3 Drying of the flesh
  • 6.4 Yellowness on white fur and fading of dark fur coats
• 7 Video: expert advice on the correct storage of a fur coat in the summer

Special conditions - a whim for an artificial, but a harsh necessity for a mink coat

You can keep a fur coat in perfect condition only if certain conditions are met.

When buying an expensive coat or fur coat, you want to be irresistible and do not admit the thought that such clothes may become unusable. To prevent this from happening, special storage conditions must be created. Under the influence of various factors, such as high air temperature, humidity or poor ventilation, natural fur can tarnish, turn yellow, lose durability and become brittle. Hair can fall out, forming bald patches on clothing.

How to prepare natural fur for storage

The winter season is over and it is time to hide the fur coat until the next suitable occasion. What measures must be taken to keep the clothes in perfect condition? The procedure is as follows:

1. Inspect the fur on the outside and inside first. Fasten the buttons if necessary, replace the torn lining.
2. Then remove any dirt, if any. The easiest option is to dry-clean your coat. But you can get rid of stains yourself.
3. If the fur is dull, crumpled, or has accumulated dust on it, dry processing will be required. Spread potato starch evenly over the surface of the fur coat at the rate of 1 cup per 50 square meters. see fur. Wipe problem areas with a sponge. Shake the fur coat well after cleaning to completely remove any loose powder residues. If the first cleansing did not give the desired result, the procedure can be repeated 2-3 times.
4. Comb the fur in the direction of the coat with a wide-toothed metal comb.
5. Air your fur coat outdoors or on an open balcony during the day.
6. After that, put the product on a coat hanger and fasten the buttons. The size of the coat hanger must match the product. Using too wide will lead to deformation, and the fur coat will sag on a narrow hanger.

Wardrobe, balcony or freezer - which room can be used for summer storage

The most important rule when choosing a room is to avoid high humidity. Store your fur coat in a cool, dark and dry place. Optimum temperatures are 15–17 ° C, humidity is 40–65%. This could be a closet or a dressing room. The required temperature indicators can be achieved using an air conditioner.

For good preservation of the fur, you will need a spacious and dark wardrobe.

Also, the room should be well ventilated and spacious. You need to create enough free space in the closet, since the fur coat should not come into contact with other clothes.

Some women practice storing their fur coats in the freezer. The low temperature really has a beneficial effect on the safety of the fur. But this is a very controversial option. In a household freezer there is no way to hang a fur coat, it will have to be stored rolled up, and as a result, creases may form.

Case or vacuum bag?

A fur coat is needed in any case. It is not recommended to store either a separate product without a cover, much less furs of different colors: the coloring material from one of them may be imprinted on the other.

The safety of a fur coat depends not only on temperature and humidity conditions, but also on the quality of the cover in which it is placed. When choosing it, you need to take into account a number of nuances:

1. The width of the cover should not be less than the width of the product. Also pay attention to the length. It should be 10-15 cm larger than the size of the fur coat. This is necessary so that the clothes do not wrinkle.
2. Choose covers with side gussets. This will prevent squeezing of the fur coat. The zipper connector should run from the tremper to the very bottom, since it will be more convenient to place the fur coat inside, and you will avoid its deformation.

3. When storing several fur coats, it is convenient to purchase covers with a transparent insert. So you will have an idea of the location of the products without taking them out. But it is impossible to allow sunlight to enter this insert.

   

   Covers for storing fur should be air permeable and should not be exposed to ultraviolet radiation

4. For a fur coat, only a cover made of natural material is suitable: linen, cotton or canvas. These fabrics will help provide airflow to the garment.
5. It is better to choose a cover in black, brown or dark blue, since they do not transmit ultraviolet light well. But you must make sure that the paint does not transfer to the fur coat. To do this, you need a regular wet wipe. Swipe over the cover, and if you don't find traces of paint on it, feel free to buy the product.

The cover, unfortunately, does not protect the fur from moths. Therefore, it is advisable to treat the material with a special spray or aerosol. For example, Mosquitall, Tornado or Raptor. Such impregnation must be renewed every 3 months, as it loses its properties.

Do not forget to put a moth repellent in the closet or spray the fur coat cover with a spray

You can put pieces of cedar bark in your pockets: the moth does not tolerate this aroma, and, accordingly, will not encroach on a fur coat. Moreover, its smell does not fade away. Dry geranium, lavender, or citrus peels are also suitable for this purpose. But folk remedies are inferior in effectiveness to aerosols and sprays. Do not use naphthalene. It repels moths well, but it is a carcinogen, and therefore, in many countries, its use has been banned for several years.

The subtleties of home storage of different furs

Each type of fur has its own period of wear and storage. To keep your clothes in perfect condition, you need to remember a few simple rules.

Mouton

The most durable is the muton. Such a fur coat is often used as an everyday option. They store it, like others, in a dark, well-ventilated cabinet. But the fur of the muton has one feature - if you do not remove the pollution from it immediately after the appearance of the stain, then it will be almost impossible to do this later. Therefore, the fur coat must be thoroughly cleaned before storage.

Mouton is stored for a long time in cold and dry conditions

Mouton's enemy is heat. The product is placed in a closet where even artificial light does not penetrate. Optimum temperature readings are 8–12 ° C, otherwise the fur may lose its shine and acquire a musty rag smell. To protect the muton from deformation as a result of its own weight, the shoulders should be exactly the same as the width of the cut of the shoulders of the product.

Mink

Mink is a capricious and not wear-resistant fur. This product should be stored in a hanging position on soft hangers. A suitable option is a cedar cabinet, since such a tree practically does not allow moisture to pass through and repels moths with a smell. It is advisable to choose a storage cover from fabric in order to provide sufficient breathability.

Mink is a delicate material that requires care

Before storage, be sure to clean the fur from dirt, it is advisable to entrust this process to specialists in dry cleaning. Mink is a very delicate material that can be easily damaged.

How to store products made from nutria, goat and other types of fur

The fur of nutria and beaver is the most wear-resistant and durable. Such fur coats will last more than one year, keeping their appearance unchanged. But there are still some storage nuances.

• The beaver product should be kept in a cool, dry place. Exposure to dampness and heat instantly spoils the fur coat, making it faded.
• Nutria fur is more stable. It is enough to protect it from moth attacks.
• Rabbit fur is stored in the same way as mink. It is important not to allow caking of the product, as well as moth attacks.
• Fur of a raccoon, fox and chinchilla lends itself easily to creases. Products are stored only on hangers. In this case, it is necessary to ensure that they are well straightened.
• A goat fur coat is placed on wide shoulders, this allows you to keep its shape. The rest of the storage conditions are unremarkable.

How non-compliance with the rules can turn out

A fur coat is a fairly expensive wardrobe item that requires careful storage. Consider the most popular fur storage mistakes and possible methods for eliminating them.

Moth damage

It is not difficult to hang a sachet for moths in the closet, but if you forget about this easy measure of care, the result will be almost irreparable: a fur coat beaten by a moth loses all its charm.

Careless storage can turn into damage to a fur coat

Creases on a folded product

If you keep a folded fur coat, it will inevitably be remembered. If the bruises are not strong, then in order to bring it into proper condition, you will need a hanger, a fur brush or a foam sponge. You can try to straighten a fur coat in two ways:

1. The first is the use of steam. First turn on hot water in the bathroom. When steam forms, put a fur coat on the hanger. It should be in the bathroom until it is completely smoothed out. Then shake the product well and dry it in a ventilated place.
2. If the fur coat is wrinkled slightly, you can resort to the second method. Dampen the sponge and gently walk over the problem areas in the direction of the pile. Then comb the fur and dry the fur coat. Repeat alignment if necessary.

Shrinking of the flesh

When storing the product in low humidity or high temperature conditions, the flesh may dry out. The flesh is the processed skin on which the fur is located.

You can try to soften the dried tough skin with a solution of 1 liter of water, 1 tbsp. l. vinegar and 50 g of salt. Apply this composition to the inside of the skin for 2 hours. Then mash the skin and rinse with water.

For this purpose, a mixture of soapy water is also suitable, to which ¼ part of its volume of fat and 1/10 of glycerin should be added. Treat the flesh with this composition and leave it for 5 hours. Then rinse and rub the skin with chalk to remove any remaining oil.

Yellowness on white fur and fading of dark fur coats

When exposed to sunlight, the fur loses its color. Dark coats may fade, and light coats may turn yellow. In the first case, proceed as follows:

• soak a cotton pad in a 9% vinegar solution and treat problem areas;
• take a napkin, apply alcohol on it and wipe the fur until it dries;
• comb the product and hang to dry.

If the fur coat is made of cigar or astrakhan fur, your actions should be the opposite. It should be dried first, and only then combed

As a result of violation of storage rules, yellowness appears on light fur. In addition to the influence of ultraviolet rays, this is caused by the ingress of dust, soot, perfumes and cosmetics.

Dry cleaning will help to get rid of such marks. But only if the damage is minor and formed recently. With a significant yellowness, exposure to chemicals will further aggravate the situation. In this case, you can take a chance and resort to home methods.

Sorbents have bleaching properties. For example, semolina, bran or starch. Processing options:

1. Spread the fur coat, apply a sorbent (semolina, wheat or rye bran must be preheated in a dry frying pan for a few seconds) and rub it into the fur. Then shake the product and comb through.
2. The second way is more efficient. Dilute 3% hydrogen peroxide or ammonia in a 1: 2 ratio with water in equal proportions, moisten a napkin and wipe the yellowed areas. It is not necessary to wash off the solution.
3. If the previous two methods did not solve the problem, you can apply bleaching shampoos for animal hair. For example, All Sistem Whiteninq, HERBAL WHITENING SHAMPOO. In this case, the fur coat must not be washed. Dilute a few drops in water and sponge the fur.

If, after all the above methods, the fur has not acquired its original color, it must be dyed. But staining should never be done at home. Take your fur coat to an atelier that provides this service.

Video: expert advice on the correct storage of a fur coat in the summer

If you adhere to all the storage requirements for a fur coat, it will last several seasons. In case of minor damage, the appearance of the product can be restored. But if the fur is significantly damaged due to improper storage, even dry cleaning specialists will not be able to help you.