Table of contents:

Typical Mistakes In Kitchen Design
Typical Mistakes In Kitchen Design

Video: Typical Mistakes In Kitchen Design

Video: Typical Mistakes In Kitchen Design
Video: COMMON DESIGN MISTAKES | Kitchen Design Mistakes and How to Fix Them | Julie Khuu 2024, May
Anonim

8 common kitchen design mistakes that spoil everything

Image
Image

The kitchen is the "epicenter" of events, the main part of the house. Here a person cooks, eats, meets guests, reads, sometimes works. Kitchen design should be as functional as possible. You should worry about the development of a project in advance, since ridiculous mistakes will be an eyesore for a long time, cause mental and physical discomfort.

Solid handles on cabinet doors

Large protruding handles are not only impractical, but even dangerous. Moving around the room, there is a risk of catching clothes or bumping.

The protruding handles reduce the opening angle of the corner cabinet door. As a result, the drawers do not fully extend. There are several ways out of the situation:

  • purchase of miniature fittings;
  • rejection of pens altogether;
  • the use of structures where to open the box it is enough to click on it;
  • use of built-in profiles with recesses instead of handles.

Glossy cabinet surfaces

Shiny facades look impressive and expensive, but there are many problems behind the outer gloss. The biggest drawback is fingerprints. To maintain a decent look, you have to wipe the furniture several times a day. It would be more practical to purchase a kitchen with a matte facade.

Stove next to the refrigerator

When planning the arrangement of furniture, you should be aware that a working oven provokes heating of the walls of the refrigerator, which leads to overheating. There must be a certain distance between the unit and the wall for air circulation. If the stove is working near the refrigerator, then the necessary cooling will not occur.

An increase in ambient temperature provokes increased operation of the refrigerator. A two-compressor device reduces degrees in the freezer, a single-compressor device - everywhere. The result is ice formation. Devices fail ahead of time.

The metal coating of the walls of the refrigerator turns yellow under the influence of high temperatures, the plastic handles and rubber bands of the seal melt and deform.

Low-rise cabinets where space allows

The large room allows for tall cabinets. This allows the most practical and rational distribution of the kitchen space. Therefore, you should not pile up low shelves and cabinets where there is a lot of free space.

The table does not match the size of the kitchen

If the room is small, then the furniture there should be selected by size. A large table steals space, looks cumbersome and ridiculous. The most suitable option in such a situation is to buy a round table. Pay attention to transparent plastic or glass. They save space. For a large kitchen, it will be appropriate to purchase a large table of any shape. Furniture from solid wood of noble species looks great.

Many open shelves

The shelves without doors are a permanent dust collector, as well as a place for a cat. Pets can climb into the shelter, dropping objects along the way. Alternatively, designers suggest glazing multiple shelves. This will allow you to keep your favorite vases and souvenirs safe, while at the same time creating the illusion of open shelves.

No room for household appliances

It is impossible to mount a kitchen where all household appliances are built-in. Space must be provided for freestanding appliances. You should think about where to put the microwave, coffee maker, toaster so that they do not clutter up the tabletop. The devices can be hidden in special open and closed shelves. It is advisable to distribute the appliances evenly throughout the kitchen so that they can be easily reached.

Few outlets and in an inconvenient location

It is necessary to plan where the large household appliances will be located at the very beginning of the repair. You should consider the location of the sockets, their number. Things are much more complicated with small devices. It is not necessary to mount sockets just in case.

To do this, designers advise to simulate the situation of everyday life: where people drink, drink coffee, cook, where the floor lamp is located, if necessary, where the tablet will be charged, and so on.

For small electrical appliances, it is convenient to use cut-in sockets. They are hidden in a closet or countertop.

A big mistake is to refuse the services of a designer if your knowledge of design and repair is not enough. A professional will help to harmoniously fit the desired ideas into the interior, while maintaining the aesthetics and functionality of the room.

Recommended: