What To Stick To The Sole So As Not To Slip In Winter

2024 Author: Bailey Albertson | [email protected]. Last modified: 2023-12-17 12:53

7 things you can glue to the sole so as not to slip in winter, even in high heels

Frosts and whims of the weather bring with them not a very pleasant phenomenon - ice on the sidewalks. Very often, beautiful and fashionable winter shoes turn into ice and become a real punishment. It is dangerous to move in it on the ice surface. You can use the advice of experienced people for fall protection and stick an anti-slip element on the sole.

Double sided tape

Double-sided adhesive tape glued to the sole can create a friction effect. As a result, a person walks more confidently even on ice.

Unfortunately, this slip prevention method is short-lived. After each exit to the street, double-sided tape must be re-glued.

Sandpaper

The sandpaper strips will last a little longer. They should be glued to the sole and heel with a universal glue.

In this case, the surface on which the prophylactic agent is glued must be dry. And it is better to choose coarse sandpaper.

Felt strips

The felt will stay on the bottom of your boot or boot for about a couple of weeks. It is not easy to get pieces of felted material right now. But if you have old felt boots, they are fine.

When walking, they will not interfere with the leg, and they will perform the anti-slip function well.

Glue and sand

Another life hack suggests using universal glue and sand. Apply a thin layer of glue to the pre-dried sole and heel and sprinkle with sand. Then you need to press the sand to the glue layer and let it dry.

The method is somewhat aggressive towards shoes, but quite reliable. Can protect against falls for about 2-3 weeks.

Adhesive plaster

Using an adhesive plaster is good in dry winters. As soon as the snow melts, the plaster flies off instantly.

Protection for a one-time exit in slippery weather is ready.

Special overlays

Professionally made linings can also help protect against slipping in icy conditions. To do this, contact a shoe shop. Usually they put polyurethane protection, which serves reliably and for a long time.

In the workshop, you can make a groove in the tread if it is not deep enough. Do not use this method on thin soles. It may burst during processing.

Silicone

Decorate the bottom of the shoe with silicone.

Applied arbitrary patterns from this building material are able to protect during icy conditions. You just need to thoroughly dry the applied layer.

Choose a suitable life hack and protect yourself in the winter ice.